<h1>1995 GMC Safari – Remote Programming via DLC Connector</h1> <ul> <li><font size="3">Step 1: Locate the Data Link Connector (DLC) beneath the dashboard on the driver’s side. It is rectangular and may not be labeled. </font></li> <li><font size="3">Step 2: Identify terminal G and a suitable ground point. Use a DLC pinout diagram if needed. </font></li> <li><font size="3">Step 3: Use a jumper wire to connect terminal G to ground. The door locks will automatically cycle if the connection is correct. </font></li> <li><font size="3">Step 4: Within a few seconds, press any button on the first remote. Wait for the locks to cycle again to confirm programming. </font></li> <li><font size="3">Step 5: Repeat Step 4 for each additional remote. </font></li> <li><font size="3">Step 6: Remove the jumper wire to exit programming mode. </font></li> <li><font size="3">Step 7: Test all remotes to ensure they function properly.</font></li> </ul>
