1995 Mazda B-Series

Programming Guide for 1995 Mazda B-Series Keyless Entry Remote Fob

Important Notice: The 1995 Mazda B-Series supports on-board programming of keyless entry remotes. Up to two remotes can be programmed during a single session. Follow the steps below carefully to ensure successful programming.

Programming Instructions:

  • Step 1: Insert the key into the ignition.
  • Step 2: Turn the ignition from OFF to RUN (the position just before engine start) five times within 10 seconds, ending on the fifth turn in the RUN position. The door locks will cycle, confirming that the vehicle has entered programming mode.
  • Step 3: Within 20 seconds, press any button on the first remote. The door locks will cycle again to confirm that the remote has been successfully programmed.
  • Step 4: Within another 20 seconds, press any button on the second remote (if applicable). The door locks will cycle, confirming programming of the second remote.
  • Step 5: Turn the ignition to the OFF position. The door locks will cycle one final time, indicating the vehicle has exited programming mode.