1995 Nissan 240SX

1995 Nissan 240SX – Keyless Entry Remote Fob Programming Instructions

Important Note: All remotes must be programmed during the same session. Any remotes not included during the procedure will be erased from the system and will no longer function.

Programming Steps:

  • Step 1: Sit in the driver’s seat and ensure all doors are closed. Use the power lock switch on the driver’s door to lock all doors.
  • Step 2: Insert the key into the ignition and remove it six times within 10 seconds. Do not turn the key. The tail lamps will flash, indicating that the system has entered programming mode and existing remote codes have been erased.
  • Step 3: Insert the key again and turn it to the ACC (Accessory) position.
  • Step 4: On the first remote fob, press the LOCK button. The tail lamps will flash again to confirm successful programming.
  • Step 5: To program an additional remote, use the power lock switch to unlock and then lock the doors.
  • Step 6: Press the LOCK button on the next remote. The tail lamps will flash to confirm programming.
  • Step 7: When all remotes have been programmed, open the driver’s door and turn the ignition to the OFF position to exit programming mode.