1996 Acura RL

<h1>1996 Acura RL Remote Keyless Entry Fob Programming Instructions</h1> Important: This procedure programs only the remote control functions (lock, unlock, panic). It does not program the ignition or transponder chip. All steps must be performed inside the vehicle with all doors unlocked. Step-by-Step Instructions: <ul> <li> Step 1: Ensure all doors are unlocked and sit in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine. </li> <li>Step 3: Press and release the LOCK button on the remote fob. </li> <li>Step 4: Turn the ignition to the OFF (I) position. Leave the key in the ignition. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition back to the OFF (I) position. </li> <li>Step 8: Turn the ignition to the ON (II) position again. </li> <li>Step 9: Press the LOCK button on the same remote. </li> <li>Step 10: Turn the ignition to the OFF (I) position once more. </li> <li>Step 11: Turn the ignition to the ON (II) position a final time. </li> <li>Step 12: Press and release the LOCK button. The door locks will cycle, indicating the vehicle has entered programming mode. </li> <li>Step 13: Press the LOCK button on each remote you wish to program, including the one used to enter programming mode. The locks will cycle after each successful input. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode. </li> <li>Step 15 (Optional): Test all remotes to confirm they operate correctly.</li> </ul>

1996 Acura RL

Join our newsletter