<p><b>1996 GMC Safari – Remote Fob Pairing via OBD Connector</b></p> <ul> <li><font size="3">Step 1: Locate the OBD port beneath the steering column. </font></li> <li><font size="3">Step 2: Identify pins 8 and 4 and confirm that they contain metal contacts. Refer to a diagram if needed. </font></li> <li><font size="3">Step 3: Use a jumper wire to connect pin 8 to pin 4. Leave the jumper in place throughout programming. </font></li> <li><font size="3">Step 4: When the jumper is connected, the door locks will automatically cycle, indicating the vehicle is ready. </font></li> <li><font size="3">Step 5: Press and hold the LOCK and UNLOCK buttons on the first remote until the locks cycle again (up to 15 seconds). </font></li> <li><font size="3">Step 6: Repeat Step 5 for each remote you want to program. </font></li> <li><font size="3">Step 7: Remove the jumper wire to exit programming mode. </font></li> <li><font size="3">Step 8: Test each remote to verify functionality.</font></li> </ul>
