<h1>1996 Lincoln Town Car – Remote Programming Instructions</h1> <p><font size="3"><b>System Type:</b> Keypad-Based Programming </font></p> <p><font size="3"><b>Step-by-Step Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Enter the original five-digit keypad code on the driver’s door. </font></li> <li><font size="3">Step 2: Within a few seconds, press the 1/2 button. The locks will cycle to confirm the system is ready. </font></li> <li><font size="3">Step 3: Press any button on the first remote. The locks will cycle again to confirm the remote has been stored. </font></li> <li><font size="3">Step 4: For additional remotes, press a button on each one within five seconds of the last. Each press should be confirmed by another lock cycle. </font></li> <li><font size="3">Step 5: To exit programming mode, press the 7/8 and 9/0 keys on the keypad at the same time. </font></li> </ul> <p><font size="3"><b>Note:</b> </font></p> <ul> <li><font size="3">The door locks will not cycle after exiting, but the system will leave programming mode.</font></li> </ul>
