1997

1997 Keyless Entry Remote Fob

Important: This vehicle supports manual (onboard) programming. Follow the instructions below to program up to three remote fobs.

Step-by-Step Programming Instructions:

  • Step 1: Insert the key and turn the ignition switch to the ON (II) position.
  • Step 2: Within 1 to 4 seconds, press the lock or unlock button on the remote while aiming it at the keyless entry receiver (generally located near the steering column).
  • Step 3: Within 1 to 4 seconds, turn the ignition switch to the OFF position.
  • Step 4: Within 1 to 4 seconds, turn the ignition switch back to the ON (II) position.
  • Step 5: Within 1 to 4 seconds, press the lock or unlock button on the remote again while aiming at the receiver.
  • Step 6: Within 1 to 4 seconds, turn the ignition switch to the OFF position.
  • Step 7: Within 4 seconds, turn the ignition switch to the ON (II) position.
  • Step 8: Within 1 to 4 seconds, press the lock or unlock button on the remote.
  • Step 9: Within 4 seconds, turn the ignition switch to the OFF position.
  • Step 10: Within 4 seconds, turn the ignition switch back to the ON (II) position.
  • Step 11: Within 1 to 4 seconds, press the lock or unlock button again.
  • Step 12: You should hear the door locks cycle, indicating the vehicle has entered programming mode. Within 1 to 4 seconds, press the lock or unlock button one more time.
  • Step 13: Within 10 seconds, program up to three remotes by aiming each one at the receiver and pressing the lock or unlock button. The door locks should activate after each remote is successfully programmed.
  • Step 14: Turn the ignition switch to the OFF position and remove the key.
  • Step 15: Test all programmed remotes to ensure proper operation."