<h1>1997 GMC Safari – Keyless Remote Programming Instructions</h1> <ul> <li><font size="3">Step 1: Locate the OBD II diagnostic connector under the dashboard on the driver’s side. </font></li> <li><font size="3">Step 2: Identify pins 8 and 4. Refer to a connector diagram to confirm the correct positions. </font></li> <li><font size="3">Step 3: Use a jumper wire to connect pin 8 to pin 4. Leave the jumper connected throughout the process. </font></li> <li><font size="3">Step 4: When connected properly, the door locks will cycle automatically, signaling that the system is ready. </font></li> <li><font size="3">Step 5: Press and hold the LOCK and UNLOCK buttons on the first remote until the locks cycle again. </font></li> <li><font size="3">Step 6: For any additional remotes, repeat Step 5 within one minute. </font></li> <li><font size="3">Step 7: Remove the jumper wire to exit programming mode. </font></li> <li><font size="3">Step 8: Test all remotes to ensure they are working correctly.</font></li> </ul>
