<h1>1997 Honda Accord Keyless Entry Remote Fob Programming Instructions</h1> <p><font size="3"><b> Important Notice:</b> Entering programming mode will erase all previously programmed remotes, so you will need to reprogram all remotes once the process begins. Ensure you complete each step within 5 seconds to prevent the system from exiting programming mode. </font></p> <p><font size="3"><b>Programming Procedure:</b> </font></p> <ul> <li><font size="3">Step 1: Turn the ignition switch to the ON (II) position. </font></li> <li><font size="3">Step 2: Press the LOCK or UNLOCK button on one of the remotes. (An un-programmed remote can be used for this step.) </font></li> <li><font size="3">Step 3: Turn the ignition switch to the LOCK (0) position. </font></li> <li><font size="3">Step 4: Repeat Steps 1–3 two more times using the same remote as in Step 2. </font></li> <li><font size="3">Step 5: Turn the ignition switch to the ON (II) position. </font></li> <li><font size="3">Step 6: Press the LOCK or UNLOCK button on the same remote. You should hear the power door locks cycle, indicating that the system has entered programming mode. </font></li> <li><font size="3">Step 7: Press the LOCK or UNLOCK button on each remote you wish to program. After pressing each button, the door locks will cycle to confirm that the system has accepted the remote. </font></li> <li><font size="3">Step 8: Turn the ignition switch to the LOCK (0) position to exit programming mode. </font></li> <li><font size="3">Step 9: Test each remote to ensure they are functioning properly.</font></li> </ul>
