1997 Oldsmobile Silhouette

Programming Guide for 1997 Oldsmobile Silhouette Keyless Entry Remote Fob

Primary Programming Method (Using MALL PGM Fuse)

Important: The 1997 Silhouette may use one of two remote programming procedures. Try the method below first. If unsuccessful, proceed to the alternative method listed afterward.

Programming Instructions:

  • Step 1: Remove the key from the ignition.
  • Step 2: Locate the MALL PGM fuse in the interior fuse box and remove it.
  • Step 3: Ensure all vehicle doors are fully closed.
  • Step 4: Insert the key into the ignition and turn it to the ACC (accessory) position.
  • Step 5: Within 1 second, turn the ignition to OFF, then back to ACC.
  • Step 6: Open and then close the driver’s door.
  • Step 7: Wait for a chime to sound, indicating that the vehicle has entered programming mode.
  • Step 8: Press and hold both the LOCK and UNLOCK buttons on the first remote simultaneously. After approximately 14 seconds, a chime will sound twice, confirming successful programming. Release the buttons.
  • Step 9: Repeat Step 8 for any additional remotes.
  • Step 10: Turn the ignition OFF, remove the key, and reinstall the MALL PGM fuse.
  • Step 11: Test all remotes to ensure proper operation.