1998 Acura RL

<h1>1998 Acura RL Remote Keyless Entry Fob Programming Instructions</h1> Important: This procedure is designed to program only the remote functions (lock, unlock, panic) of the key fob. It does not program the ignition or transponder chip. All steps must be performed inside the vehicle with all doors unlocked. Step-by-Step Instructions: <ul> <li>Step 1: Make sure all doors are unlocked and sit in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine. </li> <li>Step 3: Press and release the LOCK button on the remote fob. </li> <li>Step 4: Turn the ignition to the OFF (I) position. Leave the key in the ignition. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition back to the OFF (I) position. </li> <li>Step 8: Turn the ignition again to the ON (II) position.</li> <li> Step 9: Press the LOCK button on the remote once more. </li> <li>Step 10: Turn the ignition to the OFF (I) position. </li> <li>Step 11: Turn the ignition to the ON (II) position for the final time. </li> <li>Step 12: Press and release the LOCK button. The door locks will cycle, indicating the system has entered programming mode. </li> <li>Step 13: Press the LOCK button on each remote you want to program, including the one used to initiate the process. The locks will cycle after each successful registration. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode. </li> <li>Step 15: Test each remote to confirm proper operation.</li> </ul>

1998 Acura RL

Join our newsletter