<h1>1998 Lexus ES300 – Keyless Entry Remote Fob Programming Instructions</h1> <p><font size="3"><b>Step-by-Step Programming Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Start with the key out of the ignition. Ensure the driver's door is open, all other doors are closed, and the driver's door is unlocked. </font></li> <li><font size="3">Step 2: Insert the key into the ignition (Do NOT turn the key) and remove it. </font></li> <li><font size="3">Step 3: Perform the following steps within 40 seconds: A. Using the power lock switch on the driver's door, perform 5 lock/unlock cycles starting with the lock position. Use an even pace, approximately one cycle per second. (1 cycle = 1 lock and 1 unlock). B. Close and then open the driver's door. </font></li> <li><font size="3">Step 4: Perform the following steps within 40 seconds: A. Using the power lock switch on the driver's door, perform 5 lock/unlock cycles starting with the lock position. Use an even pace, approximately one cycle per second. (1 cycle = 1 lock and 1 unlock). B. Insert the key into the ignition cylinder. C. Turn the ignition to the ON position (Do NOT start the engine) and then back to the OFF position. D. Remove the key from the ignition. </font></li> <li><font size="3">Step 5: Press any button on the remote for at least 1 second. The system should lock and unlock the doors once, confirming that programming has started. </font></li> <li><font size="3">Step 6: Close and open the driver's door. </font></li> <li><font size="3">Step 7: Press any button on the remote for at least 1 second. The system should now lock and unlock the doors once to confirm programming. If the doors lock and unlock twice, it indicates that programming has failed. </font></li> <li><font size="3">Step 8: To program additional remotes, repeat steps 5, 6, and 7 for each additional remote.</font></li> </ul>
