1998 Nissan 200SX

1998 Nissan 200SX – Keyless Entry Remote Fob Programming Instructions

Important Note: All remotes must be programmed during the same session. Any remotes not included during programming will be erased from the system and will no longer function.

Programming Steps:

  • Step 1: Sit in the driver’s seat and ensure all doors are securely closed. Use the driver’s power lock switch to lock all doors.
  • Step 2: Insert the key into the ignition and remove it six times within 10 seconds, without turning the key. The tail lamps will flash, confirming that the previous remote codes have been cleared and the system is ready to program new remotes.
  • Step 3: Reinsert the key and turn it to the ACC (Accessory) position.
  • Step 4: On the first remote fob, press the LOCK button. The tail lamps will flash again, indicating successful programming.
  • Step 5: To program another remote, use the power lock switch to unlock and then relock the doors.
  • Step 6: Press the LOCK button on the next remote. Tail lamps will flash to confirm that it has been successfully programmed.
  • Step 7: After programming all remotes, open the driver’s door and turn the ignition to the “OFF” position to exit programming mode.