1999 Acura RL

<h1>1999 Acura RL Remote Keyless Entry Fob Programming Instructions</h1> Important: This procedure is for programming the remote functions only (lock, unlock, panic). It does not program the ignition or immobilizer chip. All steps must be performed from inside the vehicle with all doors unlocked. Step-by-Step Instructions: <ul> <li>Step 1: Unlock all doors and sit in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine. </li> <li>Step 3: Press and release the LOCK button on the remote. </li> <li>Step 4: Turn the ignition to the OFF (I) position. Leave the key in the ignition. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition to the OFF (I) position again. </li> <li>Step 8: Turn the ignition again to the ON (II) position.</li> <li> Step 9: Press the LOCK button once more. </li> <li>Step 10: Turn the ignition to the OFF (I) position. </li> <li>Step 11: Turn the ignition to the ON (II) position a final time. </li> <li>Step 12: Press and release the LOCK button. The door locks will cycle, confirming the vehicle has entered programming mode. </li> <li>Step 13: Press the LOCK button on each remote you wish to program, including the one used to initiate the process. The locks will cycle after each successful entry.</li> <li> Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode.</li> <li> Step 15: Test all remotes to ensure lock and unlock functions are working properly.</li> </ul>

1999 Acura RL

Join our newsletter