Programming Guide for 1999 Mitsubishi Galant Keyless Entry Remote Fob

Important Notice: Follow these instructions carefully to program the keyless entry remote fob. Make sure to complete each step in the correct order for the system to recognize the new remote.

Step-by-Step Instructions:

• Step 1: Locate the Data Port Locate the Data Port under the driver's side dashboard, usually located to the right of the steering column.
• Step 2: Insert Keys into the Ignition Place the vehicle keys into the ignition and leave it in the OFF position.
• Step 3: Connect the Jumper Wire Ensure there are metal contact pins in terminals 1 and 4. Use a suitable jumper wire to connect terminals 1 and 4 in the Data Port. Leave the jumper wire connected throughout the programming procedure. Be sure to identify the correct terminals.
• Step 4: Activate Programming Mode Within 10 seconds of connecting the jumper wire, press the Hazard Switch 6 times. The doors will automatically lock and unlock once, indicating that the system is now in programming mode.
• Step 5: Program the First Remote Press the LOCK button on the remote you want to register three times within 10 seconds. Upon successful programming, the doors will lock and unlock once to confirm that the remote has been successfully registered.
• Step 6: Program Additional Remotes If you have up to 4 remotes to program, repeat Step 5 for each remote within one minute. After programming each remote, the doors will lock and unlock once to confirm successful registration.
• Step 7: Disconnect the Jumper Wire Once all remotes are successfully programmed, disconnect the jumper wire from the Data Port.
• Step 8: Remove the Keys from the Ignition Finally, remove the keys from the ignition to complete the programming process.