1999 Plymouth Prowler

Keyless Entry Remote Programming Instructions – 1999 Plymouth Prowler

Note: At least one working remote is required to program additional remotes. Important Notice: You must have a functioning remote already paired with the vehicle. If no remotes are currently working, the first remote must be programmed by a qualified technician using specialized equipment.

Programming Procedure:

  • Step 1: Use the working remote to unlock the vehicle and disable the factory security system.
  • Step 2: Insert the ignition key and turn it to the RUN position (just before the engine starts).
  • Step 3: On the working remote, press and hold the UNLOCK button for 4 to 10 seconds.
  • Step 4: While continuing to hold UNLOCK, press the PANIC button for 1 second, then release both buttons. Wait up to 3 seconds for a chime, indicating the system has entered programming mode.
  • Step 5: Within 30 seconds of hearing the chime: Press and release the LOCK and UNLOCK buttons simultaneously. Then press and release the UNLOCK button only. A second chime confirms that the remote has been programmed.
  • Step 6: To program additional remotes, repeat the same button sequence (LOCK + UNLOCK, then UNLOCK) on each new remote. A chime will sound after each successful programming.
  • Step 7: When all remotes have been programmed, turn the ignition OFF and remove the key.
  • Step 8: Test all remotes to confirm that each one functions correctly.