2000 Acura RL

<h1>2000 Acura RL Remote Keyless Entry Fob Programming Instructions</h1> Important: This procedure is for programming the remote control features (lock, unlock, panic) only. It does not program the ignition or immobilizer system. Complete all steps inside the vehicle with all doors unlocked. Step-by-Step Instructions: <ul> <li>Step 1: Ensure all doors are unlocked and sit in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine. </li> <li>Step 3: Press and release the LOCK button on the remote.</li> <li> Step 4: Turn the ignition to the OFF (I) position. Leave the key in the ignition. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition back to the OFF (I) position. </li> <li>Step 8: Turn the ignition again to the ON (II) position.</li> <li> Step 9: Press the LOCK button once more on the remote. </li> <li>Step 10: Turn the ignition to the OFF (I) position. </li> <li>Step 11: Turn the ignition to the ON (II) position one final time. </li> <li>Step 12: Press and release the LOCK button. The door locks will cycle, indicating the vehicle has entered programming mode. </li> <li>Step 13: Press the LOCK button on each remote you wish to program, including the one already used. The locks will cycle after each successful registration. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode. </li> <li>Step 15: Test all remotes to confirm that lock and unlock functions work correctly.</li> </ul>

2000 Acura RL

Join our newsletter