2000 Plymouth Prowler

Keyless Entry Remote Programming Instructions – 2000 Plymouth Prowler

Note: A working remote is required to add additional remotes. If no remotes are currently functional, the initial programming must be done by a qualified technician using specialized equipment.

Programming Procedure:

  • Step 1: Use the currently working remote to unlock the vehicle and disarm the factory security system.
  • Step 2: Insert the key into the ignition and turn it to the RUN position (one click before the engine starts).
  • Step 3: On the working remote, press and hold the UNLOCK button for 4 to 10 seconds.
  • Step 4: While continuing to hold the UNLOCK button, press and hold the PANIC button for 1 second, then release both buttons. Wait up to 3 seconds for a chime, which confirms the system has entered programming mode.
  • Step 5: Within 30 seconds of the chime: Press and release the LOCK and UNLOCK buttons at the same time. Then, press and release the UNLOCK button alone. A chime will sound, indicating the remote has been successfully programmed.
  • Step 6: To program additional remotes, repeat the same sequence (LOCK + UNLOCK, then UNLOCK) on each new remote. A chime will confirm each successful programming.
  • Step 7: Turn the ignition OFF and remove the key.
  • Step 8: Test each remote to ensure all programmed remotes function properly.