<h1>Programming Instructions for 2001 TL Keyless Entry Remote Fob</h1> <p><font size="3"><b>Important Notes:</b> Entering programming mode will erase all previously programmed remotes. Be sure to reprogram all remotes you wish to use during the same session. Each step must be completed within 4 seconds of the last to keep the system in programming mode. Additional remotes must be programmed within 10 seconds of each other. </font></p> <p><font size="3"><b>Step-by-Step Procedure:</b></font></p> <ul> <li><font size="3"> Step 1: Turn the ignition switch to the ON (II) position. </font></li> <li><font size="3">Step 2: Within 4 seconds, press the LOCK or UNLOCK button on one remote. (This can be a new or existing remote.) </font></li> <li><font size="3">Step 3: Within 4 seconds, turn the ignition switch to the OFF (0) position. </font></li> <li><font size="3">Step 4: Within 4 seconds, turn the ignition switch back to ON (II).</font></li> <li><font size="3"> Step 5: Repeat Steps 2 through 4 two additional times, using the same remote each time. </font></li> <li><font size="3">Step 6: Within 4 seconds, press the LOCK or UNLOCK button again on the same remote. The door locks should cycle, confirming the vehicle is in programming mode.</font></li> <li><font size="3"> Step 7: Within 10 seconds, press the LOCK or UNLOCK button again on the same remote to save it. </font></li> <li><font size="3">Step 8: Within 10 seconds of each other, press the LOCK or UNLOCK button on any other remotes you wish to program. The locks should cycle to confirm successful programming of each one. </font></li> <li><font size="3">Step 9: Turn the ignition switch to the OFF (0) position to exit programming mode. </font></li> <li><font size="3">Step 10: Test all remotes to verify proper functionality.</font></li> </ul>
