<h1>2002 Acura MDX Remote Keyless Entry Fob</h1> <p><b>Important</b>: The 2002 Acura MDX supports onboard programming. You can manually program up to three remotes using the steps below. Be sure to complete the process from inside the vehicle with all doors unlocked.</p> <p><b>Step-by-Step Programming Instructions:</b></p> <ul> <li>Step 1: Make sure all doors are unlocked and you are seated inside the vehicle.</li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine.</li> <li>Step 3: Press and release the LOCK button on the remote you wish to program.</li> <li>Step 4: Turn the ignition to the OFF (I) position. Keep the key in the ignition.</li> <li>Step 5: Turn the ignition back to the ON (II) position.</li> <li>Step 6: Press the UNLOCK button on the same remote.</li> <li>Step 7: Turn the ignition to the OFF (I) position again.</li> <li>Step 8: Turn the ignition to the ON (II) position once more.</li> <li>Step 9: Press the LOCK button on the same remote.</li> <li>Step 10: Turn the ignition to the OFF (I) position.</li> <li>Step 11: Turn the ignition to the ON (II) position one final time.</li> <li>Step 12: Press and release the LOCK button. The door locks should cycle, indicating the vehicle has entered programming mode.</li> <li>Step 13: Press the LOCK button on each remote you want to program, one at a time. The door locks will cycle after each remote is successfully registered.</li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode.</li> <li>Step 15: Test each remote to ensure all programmed functions work correctly.</li> </ul>
