2002 Oldsmobile Bravada

Keyless Entry Remote Programming Instructions – 2002 Oldsmobile Bravada

Important Notice: This vehicle supports onboard programming. All remote fobs must be programmed during the same session. Remotes not included during the procedure will no longer function.

Programming Procedure:

  • Step 1: Ensure all vehicle doors are closed.
  • Step 2: Insert the ignition key, but do not turn it.
  • Step 3: On the driver’s door, press and hold the power UNLOCK button. Continue holding it until Step 9.
  • Step 4: Perform the following ignition cycle steps in quick succession:
  • Step 5: Turn the ignition to the ON position (do not start the engine).
  • Step 6: Turn the ignition to the OFF position.
  • Step 7: Turn the ignition to ON again.
  • Step 8: Turn the ignition back to OFF.
  • Step 9: Release the UNLOCK button. The door locks will cycle (lock and unlock), confirming the vehicle has entered programming mode.
  • Step 10: On the first remote, press and hold both the LOCK and UNLOCK buttons simultaneously. Hold for up to 30 seconds, or until the locks cycle again to confirm programming.
  • Step 11: Repeat Step 10 for each additional remote you wish to program, including any previously working remotes.
  • Step 12: Turn the ignition to the ON position to exit programming mode.
  • Step 13: Remove the key and test all remotes to confirm proper operation.