2002 Suzuki Grand Vitara

2002 Suzuki Grand Vitara Keyless Entry Remote Fob Programming Instructions

Important Note: These steps apply to vehicles equipped with a standard key and keyless entry remote fob (non-Smart Key system). Follow the instructions carefully to enter programming mode and sync your remote(s).

Step-by-Step Programming Procedure:

  • Step 1: Remove the key from the ignition.
  • Step 2: Ensure all doors are fully closed.
  • Step 3: Open the driver’s door and leave it open throughout the procedure.
  • Step 4: Insert the key into the ignition, turn it to the ON position (do not start the engine), then turn it OFF and remove the key—all within 10 seconds.
  • Step 5: Within the next 20 seconds, close and open the driver’s door three times in quick succession.
  • Step 6: Reinsert the key, turn it to the ON position, then turn it OFF and remove it again—within 10 seconds.
  • Step 7: The door locks should automatically cycle (lock and unlock), confirming that the vehicle has entered programming mode.
  • Step 8: Press the UNLOCK button on the remote. The door locks should cycle again to confirm successful programming.
  • Step 9: Repeat Step 8 for any additional remotes you wish to program.
  • Step 10: Exit the vehicle, close all doors, and test each remote to ensure proper operation of all functions.