2002 Suzuki XL7

2002 Suzuki XL7 Keyless Entry Remote Fob Programming Instructions

For Vehicles with a Standard Key and Remote Fob (Non-Smart Key System)

Important Note: These instructions apply to models equipped with a traditional ignition key and a separate keyless entry remote. Follow the steps below carefully to place the vehicle in programming mode and pair your remote(s).

Step-by-Step Procedure:

  • Step 1: Remove the key from the ignition switch.
  • Step 2: Ensure all doors are completely closed.
  • Step 3: Open the driver’s door and keep it open throughout the entire process.
  • Step 4: Insert the key into the ignition, turn it to the ON position (do not start the engine), then turn it OFF and remove the key — all within 10 seconds.
  • Step 5: Within 20 seconds, quickly close and open the driver’s door three times.
  • Step 6: Reinsert the key, turn it to the ON position, then turn it OFF and remove it again — within 10 seconds.
  • Step 7: The door locks should automatically lock and unlock, indicating the system has entered programming mode.
  • Step 8: Press the UNLOCK button on the remote fob. The locks should cycle again to confirm successful programming.
  • Step 9: Repeat Step 8 for each additional remote you wish to program.
  • Step 10: Exit the vehicle, close all doors, and test each remote to ensure all keyless functions are operating correctly.