2002 Toyota Camry

2002 Toyota Camry – Keyless Entry Remote Fob Programming Guide

Important Notice: This vehicle supports onboard programming for keyless entry remotes. Precise timing is essential. If the steps are not performed quickly and in the correct order, the system will not enter programming mode.

Programming Instructions:

  • Step 1: Begin with the key out of the ignition. Ensure the driver’s door is open and unlocked, and all other doors are closed.
  • Step 2: Within 5 seconds, do the following: A. Insert the key into the ignition (do not turn it), then remove it. B. Insert the key into the ignition again (do not turn), then remove it.
  • Step 3: Within 40 seconds, complete the following: A. Close and open the driver’s door. B. Close and open the driver’s door again. C. Insert the key into the ignition (do not turn), then remove it.
  • Step 4: Within another 40 seconds, perform these steps: A. Close and open the driver’s door. B. Close and open the driver’s door again. C. Insert the key into the ignition and leave it in. D. Close the driver’s door. E. Turn the ignition to the ON position (do not start), then turn it OFF. F. Remove the key from the ignition.
  • Step 5: Within 3 seconds, the power door locks should automatically lock and then unlock, indicating that the vehicle has entered programming mode. If the locks do not cycle, restart from Step 1.
  • Step 6: Within 40 seconds, program each remote as follows: A. Press and hold the LOCK and UNLOCK buttons on the remote simultaneously for 1.5 seconds, then release. B. Immediately press and hold the LOCK button alone for 2 seconds, then release. If programming is successful, the door locks will lock and unlock once. If the locks cycle twice, the remote was not accepted. Repeat steps A and B. C. Repeat steps A and B for each additional remote you wish to program.
  • Step 7: Open the driver’s door to exit programming mode.