2003 Honda Pilot

<h1>2003 Honda Pilot – Keyless Entry Remote Fob Programming Guide</h1> Important Notice: Entering programming mode will erase all previously programmed remotes. You must reprogram every remote you want to use during the same session. Steps 1 through 12 must be completed within 5 seconds of each other to successfully enter programming mode. Step 13 (programming each remote) must be done within 10 seconds per remote. Programming Instructions: <ul> <li>Step 1: Ensure all doors are unlocked. </li> <li>Step 2: Insert the key and turn the ignition to the ON position (Position II). </li> <li>Step 3: Press either the LOCK or UNLOCK button on the remote. </li> <li>Step 4: Turn the ignition to the ACCESSORY (I) or LOCK (0) position. </li> <li>Step 5: Turn the ignition back to the ON position (II). </li> <li>Step 6: Press the LOCK or UNLOCK button again on the same remote. </li> <li>Step 7: Turn the ignition to ACCESSORY (I) or LOCK (0). </li> <li>Step 8: Turn the ignition to the ON position (II) once more. </li> <li>Step 9: Press the LOCK or UNLOCK button again on the same remote.</li> <li> Step 10: Turn the ignition to ACCESSORY (I) or LOCK (0). </li> <li>Step 11: Turn the ignition back to the ON position (II). </li> <li>Step 12: Press the LOCK or UNLOCK button again. The door locks should cycle (lock and unlock) to confirm the system has entered programming mode. </li> <li>Step 13: Press the LOCK button on each remote you wish to program. The door locks will cycle after each successful entry. The system accepts up to three remotes.</li> <li> Step 14: Turn the ignition to the LOCK position (0) to exit programming mode. </li> <li>Step 15: Test each remote to ensure all functions are working correctly.</li> </ul>

2003 Honda Pilot

Join our newsletter