<h1>2003 Lincoln Blackwood Keyless Entry Remote Fob</h1> <p><font size="3"><b>Important:</b> Before beginning, ensure all vehicle doors are closed. Unlock all doors using the power door lock switch on the driver’s side. All remote fobs you want to program must be done in the same session. </font></p> <p><font size="3"><b>Step-by-Step Programming Instructions:</b></font></p> <ul> <li><font size="3"> Step 1: Enter the vehicle and close all doors securely. </font></li> <li><font size="3">Step 2: Use the driver’s side power door lock switch to unlock all doors. </font></li> <li><font size="3">Step 3: Insert the ignition key into the ignition cylinder. </font></li> <li><font size="3">Step 4: Turn the ignition from the OFF position to the RUN position (do not start the engine) eight times within 10 seconds, ending with the 8th turn in the RUN position. If performed correctly, the door locks will automatically cycle (lock and unlock) once, indicating the vehicle has entered programming mode. </font></li> <li><font size="3">Step 5: Within 20 seconds, press any button on the first remote fob. ? The door locks will cycle again to confirm successful programming of the first remote. </font></li> <li><font size="3">Step 6: Within another 20 seconds, press any button on the second remote fob, if applicable. ? The locks will cycle again to confirm programming. </font></li> <li><font size="3">Step 7: Repeat this process for any additional remotes. ? Up to four remotes can be programmed during the same session. The locks will cycle after each successful entry. </font></li> <li><font size="3">Step 8: Once all remotes have been programmed, turn the ignition to the OFF position. ? The locks will cycle one final time to confirm the vehicle has exited programming mode. </font></li> <li><font size="3">Step 9: Remove the key from the ignition.</font></li> <li><font size="3"> Step 10: Test each programmed remote to ensure it locks and unlocks the doors as expected.</font></li> </ul>
