2003 Oldsmobile Bravada

Keyless Entry Remote Programming Instructions – 2003 Oldsmobile Bravada

Important Notice: This vehicle supports onboard programming for keyless entry remotes. All remotes must be programmed during the same session. Any remotes not included will be erased from memory.

Programming Procedure:

  • Step 1: Ensure that all doors are closed before beginning.
  • Step 2: Insert the ignition key into the ignition cylinder. Do not turn it yet.
  • Step 3: On the driver’s door panel, press and hold the power UNLOCK button. Keep holding this button until Step 9.
  • Step 4: Perform the following ignition steps quickly and in sequence:
  • Step 5: Turn the ignition to the ON position (do not start the engine).
  • Step 6: Turn the ignition back to the OFF position.
  • Step 7: Turn the ignition to ON again.
  • Step 8: Turn the ignition back to OFF.
  • Step 9: Release the UNLOCK button. The door locks will cycle (lock and unlock), confirming that the vehicle has entered programming mode.
  • Step 10: On the first remote, press and hold both the LOCK and UNLOCK buttons simultaneously. Hold until the locks cycle again, which may take up to 30 seconds.
  • Step 11: Repeat Step 10 for each additional remote you wish to program, including any existing ones.
  • Step 12: Turn the ignition to the ON position to exit programming mode.
  • Step 13: Remove the key and test all remotes to ensure they function correctly.