2003 Suzuki Grand Vitara

2003 Suzuki Grand Vitara Keyless Entry Remote Fob Programming Instructions

Important Note: These instructions apply to vehicles equipped with a standard key and a separate keyless entry remote (non-Smart Key system). Follow the steps below to enter programming mode and sync your remote(s).

Step-by-Step Procedure:

  • Step 1: Remove the key from the ignition.
  • Step 2: Ensure all doors are fully closed.
  • Step 3: Open the driver’s door and leave it open throughout the process.
  • Step 4: Insert the key into the ignition, turn it to the ON position (do not start the engine), then turn it OFF and remove the key—all within 10 seconds.
  • Step 5: Within the next 20 seconds, quickly close and open the driver’s door three times.
  • Step 6: Reinsert the key, turn it to the ON position, then turn it OFF and remove it—again within 10 seconds.
  • Step 7: The door locks should automatically cycle (lock and unlock), indicating that the vehicle has entered remote programming mode.
  • Step 8: Press the UNLOCK button on the remote fob. The door locks should cycle again to confirm successful programming.
  • Step 9: Repeat Step 8 for each additional remote you wish to program.
  • Step 10: Exit the vehicle, close all doors, and test each remote to ensure all functions are operating correctly.