2003 Suzuki XL7

2003 Suzuki XL7 Keyless Entry Remote Fob Programming Instructions

For Vehicles with a Standard Key and Remote Fob (Non-Smart Key System)

Important Note: These steps apply to vehicles equipped with a traditional key ignition and a separate keyless entry remote. Carefully follow the instructions to place the vehicle in programming mode and pair your remote(s).

Step-by-Step Procedure:

  • Step 1: Remove the key from the ignition.
  • Step 2: Make sure all doors are completely closed.
  • Step 3: Open the driver’s door and leave it open throughout the procedure.
  • Step 4: Insert the key into the ignition, turn it to the ON position (without starting the engine), then turn it OFF and remove it — all within 10 seconds.
  • Step 5: Within 20 seconds, quickly close and open the driver’s door three times.
  • Step 6: Reinsert the key, turn it to the ON position again, then turn it OFF and remove it — within 10 seconds.
  • Step 7: The door locks should automatically cycle (lock and unlock), indicating the vehicle has entered programming mode.
  • Step 8: Press the UNLOCK button on the remote. The locks should cycle once more to confirm the remote has been successfully programmed.
  • Step 9: Repeat Step 8 for each additional remote you wish to program.
  • Step 10: Exit the vehicle, close all doors, and test each remote to ensure proper operation.