2004 Lincoln Aviator

<h1>2004 Lincoln Aviator Keyless Entry Remote Fob</h1> Important: Begin with all doors closed and unlocked. Use the power door lock switch on the driver’s door panel to unlock the vehicle before starting the process. Have all remote fobs you wish to program ready, as the process must be completed without interruption. Step-by-Step Programming Instructions: <ul> <li>Step 1: Enter the vehicle and sit in the driver’s seat. Make sure all doors are closed. </li> <li>Step 2: Use the driver’s side power door lock switch to unlock all doors. </li> <li>Step 3: Insert the key into the ignition. </li> <li>Step 4: Turn the ignition key from the OFF position to the RUN position (do not start the engine) eight times within 10 seconds, ending on the eighth turn in the RUN position. Tip: Perform the sequence quickly and steadily. If done correctly, the door locks will automatically cycle (lock and unlock) to indicate that the vehicle has entered programming mode. </li> <li>Step 5: Within 20 seconds, press any button on the first remote fob you wish to program. The door locks will cycle again to confirm that the remote has been successfully programmed.</li> <li> Step 6: Within 20 seconds of programming the first remote, press any button on the second remote fob, if applicable. The door locks will cycle to confirm successful programming of the second remote.</li> <li> Step 7: Repeat the previous step for any additional remotes. Up to four remotes can be programmed to the vehicle. </li> <li>Step 8: Once all remotes have been programmed, turn the ignition key to the OFF position. The door locks will cycle once more to signal that programming mode has ended. </li> <li>Step 9: Remove the key from the ignition and exit the vehicle. </li> <li>Step 10: Test each remote fob to ensure it can lock and unlock the doors properly.</li> </ul>

2004 Lincoln Aviator

Join our newsletter