<h1>2004 Lincoln Town Car – Remote Fob Programming Instructions</h1> <p><font size="3"><b>System Type:</b> Onboard Programmable (Manual Ignition Key Required) </font></p> <p><font size="3"><b>Step-by-Step Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Ensure all doors are fully closed. </font></li> <li><font size="3">Step 2: Open the driver’s door and press the UNLOCK button on the interior door panel. Leave the door open. </font></li> <li><font size="3">Step 3: Insert the ignition key. </font></li> <li><font size="3">Step 4: Turn the key from OFF to RUN (do not start the engine) eight times within 10 seconds, stopping at RUN on the eighth turn. </font></li> <li><font size="3">Step 5: The door locks will cycle automatically to confirm entry into programming mode. </font></li> <li><font size="3">Step 6: Within 20 seconds, press any button on the first remote. The locks will cycle to confirm programming. </font></li> <li><font size="3">Step 7: Repeat Step 6 for any additional remotes (up to four), ensuring each is done within its own 20-second window. </font></li> <li><font size="3">Step 8: Turn the ignition to OFF. A final lock cycle confirms the end of the session.</font></li> </ul>
