2004 Oldsmobile Bravada

Keyless Entry Remote Programming Instructions – 2004 Oldsmobile Bravada

Important Notice: This vehicle supports onboard programming. All key fobs must be programmed during the same session. Any remotes not programmed during this procedure will be erased from memory.

Programming Procedure:

  • Step 1: Make sure all vehicle doors are completely closed.
  • Step 2: Insert the key into the ignition, but do not turn it.
  • Step 3: On the driver’s door panel, press and hold the power UNLOCK button. Continue holding this button until Step 9.
  • Step 4: Perform the next steps quickly and in sequence:
  • Step 5: Turn the ignition to the ON position (do not start the engine).
  • Step 6: Turn the ignition back to the OFF position.
  • Step 7: Turn the ignition to ON again.
  • Step 8: Turn the ignition back to OFF.
  • Step 9: Release the UNLOCK button. The vehicle’s door locks will automatically lock and unlock, confirming entry into programming mode.
  • Step 10: On the first remote fob, press and hold both the LOCK and UNLOCK buttons simultaneously. Continue holding until the door locks cycle again—this may take up to 30 seconds.
  • Step 11: Repeat Step 10 for each additional remote you wish to program, including any existing ones.
  • Step 12: Turn the ignition to the ON position to exit programming mode.
  • Step 13: Remove the key and test all programmed remotes to confirm proper operation.