2004 Suzuki XL7

2004 Suzuki XL7 Keyless Entry Remote Fob Programming Instructions

For Models with a Standard Key and Remote Fob (Non-Smart Key System)

Important Note: These instructions are intended for vehicles with a standard ignition key and a separate keyless entry remote. Follow the steps below to enter programming mode and sync your remote(s).

Step-by-Step Procedure:

  • Step 1: Remove the key from the ignition.
  • Step 2: Confirm that all doors are fully closed.
  • Step 3: Open the driver’s door and leave it open for the duration of the process.
  • Step 4: Insert the key into the ignition, turn it to the ON position (do not start the engine), then turn it OFF and remove it — all within 10 seconds.
  • Step 5: Within 20 seconds, quickly close and open the driver’s door three times.
  • Step 6: Reinsert the key, turn it to the ON position, then turn it OFF and remove it again — within 10 seconds.
  • Step 7: The door locks should cycle (lock and unlock) automatically, confirming the vehicle has entered programming mode.
  • Step 8: Press the UNLOCK button on the remote fob. The locks should cycle once more to confirm the remote has been successfully programmed.
  • Step 9: Repeat Step 8 for each additional remote you wish to program. Step 10: Exit the vehicle, close all doors, and test each remote to ensure full functionality.