2004 Toyota Camry Solara

2004 Toyota Camry Solara Keyless Entry Remote Fob Programming Instructions

Important Notice: This vehicle supports onboard programming for keyless entry remotes. Be sure to follow each step within the designated time frame for the procedure to be successful.

Programming Procedure:

  • Step 1: Initial Setup Ensure the key is out of the ignition. Open the driver’s door and leave it open. All other doors should be closed, and the driver’s door must remain unlocked.
  • Step 2: Begin Key Insertion (Within 5 Seconds) A. Insert the key into the ignition (do not turn), then remove it. B. Repeat: Insert the key again (do not turn), then remove it.
  • Step 3: Perform Door Sequence (Within 40 Seconds) A. Close and then reopen the driver’s door. B. Close and then reopen the driver’s door again. C. Insert the key into the ignition (do not turn), then remove it.
  • Step 4: Second Door and Ignition Sequence (Within 40 Seconds) A. Close and then reopen the driver’s door. B. Close and then reopen the driver’s door again. C. Insert the key into the ignition and leave it inserted. D. Close the driver’s door. E. Turn the ignition to the ON position (do not start the engine), then turn it OFF. F. Remove the key from the ignition.
  • Step 5: Enter Programming Mode Within 3 seconds, the door locks should automatically lock and unlock, indicating the vehicle has entered programming mode. If the locks do not respond, repeat the process from Step 1.
  • Step 6: Program Remote(s) (Within 40 Seconds) A. Press and hold both the lock and unlock buttons on the remote simultaneously for 1.5 seconds, then release. B. Immediately press and hold the lock button alone for 2 seconds, then release. If successful, the door locks will lock and then unlock once. If the locks cycle twice, the remote was not accepted—repeat steps A and B. C. Repeat this step for each additional remote you wish to program.
  • Step 7: Complete Programming Open the driver’s door to exit programming mode.