2005 Honda Pilot

<h1>2005 Honda Pilot – Keyless Entry Remote Fob Programming Guide</h1> Important Notice: Entering programming mode will erase all previously stored remotes. You must reprogram every remote you want to use during the same session. Steps 1–12 must be completed within 5 seconds of each other to enter programming mode. Each remote in Step 13 must be programmed within 10 seconds. Programming Instructions: <ul> <li>Step 1: Ensure all doors are unlocked. </li> <li>Step 2: Insert the key and turn the ignition to the ON position (Position II). </li> <li>Step 3: Press either the LOCK or UNLOCK button on the remote you want to program. </li> <li>Step 4: Turn the ignition to the ACCESSORY (I) or LOCK (0) position. </li> <li>Step 5: Turn the ignition back to the ON position (II). </li> <li>Step 6: Press the LOCK or UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition to ACCESSORY (I) or LOCK (0).</li> <li> Step 8: Turn the ignition to ON (II) again. </li> <li>Step 9: Press the LOCK or UNLOCK button once more on the same remote. </li> <li>Step 10: Turn the ignition to ACCESSORY (I) or LOCK (0). </li> <li>Step 11: Turn the ignition to the ON position (II) again. </li> <li>Step 12: Press the LOCK or UNLOCK button on the same remote. If done correctly, the door locks will cycle (lock and unlock) to confirm that the vehicle is in programming mode. </li> <li>Step 13: Press the LOCK button on each remote you wish to program. The locks should cycle each time to confirm successful pairing. The system can accept up to three remotes. </li> <li>Step 14: Turn the ignition to the LOCK position (0) to exit programming mode. </li> <li>Step 15: Test all remotes to ensure proper operation of lock and unlock functions.</li> </ul>

2005 Honda Pilot

Join our newsletter