2005 Lincoln Aviator

<h1>2005 Lincoln Aviator Keyless Entry Remote Fob</h1> Important: Ensure all doors are closed and unlocked before beginning. Use the power door lock switch located on the driver’s door panel to unlock the doors. Have all remote fobs ready, as they must be programmed during the same session. Step-by-Step Programming Instructions: <ul> <li>Step 1: Enter the vehicle and sit in the driver’s seat. Make sure all doors are securely closed. </li> <li>Step 2: Unlock all doors using the power door lock switch on the driver’s side door panel.</li> <li> Step 3: Insert the key into the ignition.</li> <li> Step 4: Turn the ignition key from the OFF position to the RUN position (do not start the engine) eight times within 10 seconds, ending on the eighth turn in the RUN position. If completed correctly, the door locks will cycle (lock and unlock) to confirm that the vehicle has entered programming mode. </li> <li>Step 5: Within 20 seconds, press any button on the first remote fob. The door locks will cycle again, confirming that the remote has been successfully programmed.</li> <li> Step 6: Within 20 seconds, press any button on the second remote fob, if applicable. The locks will cycle once more to confirm the second remote has been programmed. </li> <li>Step 7: Repeat the previous step for any additional remotes. Up to four remotes can be programmed to the vehicle. </li> <li>Step 8: When all remotes have been programmed, turn the ignition to the OFF position. The locks will cycle one final time, indicating the vehicle has exited programming mode. </li> <li>Step 9: Remove the key from the ignition. </li> <li>Step 10: Test each programmed remote to confirm it operates all functions correctly, including locking and unlocking the doors.</li> </ul>

2005 Lincoln Aviator

Join our newsletter