2005 Toyota Camry Solara

2005 Toyota Camry Solara Keyless Entry Remote Fob Programming Instructions

Important Notice: This vehicle supports onboard programming of keyless entry remotes. Each step must be followed precisely and completed within the specified time limits.

Programming Procedure:

  • Step 1: Prepare the Vehicle Ensure the key is out of the ignition. Open the driver’s door and leave it open. All other doors should be closed, and the driver’s door should remain unlocked.
  • Step 2: Begin Key Insertion (Within 5 Seconds) A. Insert the key into the ignition (do not turn), then remove it. B. Repeat: Insert the key again (do not turn), then remove it.
  • Step 3: Perform Door Movement Sequence (Within 40 Seconds) A. Close, then open the driver’s door. B. Close, then open the driver’s door again. C. Insert the key into the ignition (do not turn), then remove it.
  • Step 4: Continue Door and Ignition Steps (Within 40 Seconds) A. Close, then open the driver’s door. B. Close, then open the driver’s door again. C. Insert the key into the ignition and leave it in place. D. Close the driver’s door. E. Turn the ignition to the ON position (do not start the engine), then turn it OFF. F. Remove the key from the ignition.
  • Step 5: Enter Programming Mode Within 3 seconds, the door locks should automatically lock and unlock, indicating the vehicle has successfully entered programming mode. If the locks do not respond, restart the process from Step 1.
  • Step 6: Program Remote(s) (Within 40 Seconds) A. Press and hold the lock and unlock buttons on the remote simultaneously for 1.5 seconds, then release. B. Immediately press and hold the lock button alone for 2 seconds, then release. If successful, the door locks will lock and then unlock once. If the locks cycle twice, the remote was not accepted—repeat steps A and B. C. Repeat the process for any additional remotes.
  • Step 7: Finalize Programming Open the driver’s door to exit programming mode.