<h1>2006 GMC Envoy – Remote Learning Mode Activation</h1> <p><font size="3"><b>System Type:</b> Onboard programming supported </font></p> <p><font size="3"><b>Programming Steps:</b> </font></p> <ul> <li><font size="3">Step 1: Make sure all doors are completely shut. </font></li> <li><font size="3">Step 2: Insert the ignition key without turning it. </font></li> <li><font size="3">Step 3: Press and hold the UNLOCK button on the driver’s door. </font></li> <li><font size="3">Step 4: While holding the button, turn the key: To ON, then to OFF. To ON again, then to OFF. </font></li> <li><font size="3">Step 5: Release the UNLOCK button. The locks should cycle to confirm programming mode. </font></li> <li><font size="3">Step 6: Press and hold LOCK and UNLOCK on the first remote until locks cycle. </font></li> <li><font size="3">Step 7: Repeat Step 6 for all remotes you want to program. </font></li> <li><font size="3">Step 8: Turn ignition to ON to exit programming mode. </font></li> <li><font size="3">Step 9: Test all remotes to confirm functionality.</font></li> </ul>
