<h1>2006 Lincoln Navigator — Keyless Entry Remote Fob Programming</h1> <p><font size="3"><strong> Step-by-Step Instructions Important Preparation:</strong> </font></p> <ul> <li><font size="3">Step 1: Close all vehicle doors completely. </font></li> <li><font size="3">Step 2: Open the driver’s door and press the UNLOCK button on the driver-side door panel while keeping the door open. </font></li> <li><font size="3">Step 3: Insert the key into the ignition but do not turn it yet. Entering Programming Mode: </font></li> <li><font size="3">Step 4: Turn the ignition from OFF to RUN (do not start the engine) a total of 8 times within 10 seconds, ending on RUN the 8th time. The door locks will cycle to confirm that the vehicle has entered programming mode. Programming the Remotes: </font></li> <li><font size="3">Step 5: Within 20 seconds, press any button on the first keyless remote. The door locks will cycle to confirm that the remote has been successfully programmed. </font></li> <li><font size="3">Step 6: Within 20 seconds, press any button on the second keyless remote, if available. The door locks will cycle again to confirm programming of the second remote. Exiting Programming Mode: </font></li> <li><font size="3">Step 7: Turn the ignition to the OFF position. The door locks will cycle one final time to indicate that programming mode has been exited.</font></li> </ul>
