2006 Subaru Impreza Keyless Entry Remote Fob Programming Instructions

Important Note: Before starting, make sure any installed alarm system is deactivated. You can program up to four remotes during the session.

Step-by-Step Programming Instructions:

• Step 1: Open the driver’s door, sit in the driver’s seat, and close the door. Make sure all other doors are fully closed.
• Step 2: Within 15 seconds, insert the key into the ignition and quickly turn it from the LOCK to the ON position and back to LOCK ten times in a row. Do not start the engine. Leave the key in the ignition after the final cycle. A single confirmation tone will sound, indicating the vehicle has entered programming mode.
• Step 3: Within 45 seconds, complete the following steps for each remote:
• Step 4: A. Open and close the driver’s door once. B. Press the LOCK or UNLOCK button on the remote you wish to program. A double tone will sound to confirm successful programming.
• Step 5: Repeat Step 4 for each additional remote you want to program (up to four total). Each successful remote will trigger a confirmation tone.
• Step 6: When finished, remove the key from the ignition. The vehicle will emit three tones, signaling that it has exited programming mode.
• Step 7: Test each remote to ensure that the locking and unlocking functions are working properly.