2006 Suzuki Aerio

2006 Suzuki Aerio Keyless Entry Remote Fob Programming Instructions

Important Notes: A maximum of two remotes can be programmed. This procedure erases all previously stored remotes. All steps must be performed quickly and accurately.

Programming Procedure:

  • Step 1: Remove the key from the ignition.
  • Step 2: Ensure all doors are closed completely.
  • Step 3: Open the driver's door and leave it open.
  • Step 4: Insert the key into the ignition, turn it to the ON position (do not start the engine), then turn it OFF and remove the key — all within 10 seconds.
  • Step 5: Within the next 20 seconds, close and open the driver’s door three times.
  • Step 6: Insert the key again and turn it to the ON position, then turn it OFF and remove the key — again, within 10 seconds.
  • Step 7: The door locks should automatically lock and unlock once. This confirms the vehicle has entered remote programming mode.
  • Step 8: Press the UNLOCK button on the remote you wish to program. The door locks should cycle once to confirm successful registration.
  • Step 9: Repeat Step 8 for any additional remote fobs.
  • Step 10: Exit the vehicle with all programmed remotes and close the driver's door. Test each remote by pressing LOCK and UNLOCK to ensure proper operation.