2006 Toyota Camry Solara

2006 Toyota Camry Solara Keyless Entry Remote Fob Programming Instructions

Important Notice: The 2006 Camry Solara allows onboard programming of remote fobs. All actions must be completed within the given timeframes to successfully program your remote.

Programming Procedure:

  • Step 1: Prepare the Vehicle Ensure the key is out of the ignition. Open the driver’s door and leave it open. Make sure all other doors are closed, and the driver’s door remains unlocked.
  • Step 2: Begin Key Insertion (Within 5 Seconds) A. Insert the key into the ignition (do not turn it), then remove it. B. Repeat: Insert the key again (do not turn it), then remove it.
  • Step 3: Perform First Door Sequence (Within 40 Seconds) A. Close and reopen the driver’s door. B. Close and reopen the driver’s door again. C. Insert the key into the ignition (do not turn it), then remove it.
  • Step 4: Perform Second Door and Ignition Sequence (Within 40 Seconds) A. Close and reopen the driver’s door. B. Close and reopen the driver’s door again. C. Insert the key into the ignition and leave it inserted. D. Close the driver’s door. E. Turn the ignition to the ON position (do not start the engine), then back to OFF. F. Remove the key from the ignition.
  • Step 5: Enter Programming Mode Within 3 seconds, the power door locks should lock and then unlock automatically. This confirms successful entry into programming mode. If the locks do not cycle, restart the process from Step 1.
  • Step 6: Program Remote(s) (Within 40 Seconds) A. Press and hold both the lock and unlock buttons on the remote simultaneously for 1.5 seconds, then release. B. Immediately press and hold the lock button for 2 seconds, then release. If successful, the door locks will lock and unlock once. If the locks cycle twice, the remote was not accepted. Repeat steps A and B. C. Repeat this step for each additional remote to be programmed.
  • Step 7: Finalize Programming Open the driver’s door to exit programming mode.