2007 Acura MDX

<h1>Remote Programming Instructions for 2007 Acura MDX</h1> Important: This procedure programs the remote functions only (lock, unlock, panic). It does not program the ignition or transponder chip. Programming must be completed from inside the vehicle with all doors unlocked. Step-by-Step Programming Instructions: <ul> <li>Step 1: Ensure all doors are unlocked, and sit in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine. </li> <li>Step 3: Press and release the LOCK button on the remote you wish to program. </li> <li>Step 4: Turn the ignition to the OFF (I) position. Leave the key in the ignition. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition back to the OFF (I) position. </li> <li>Step 8: Turn the ignition to the ON (II) position again. </li> <li>Step 9: Press the LOCK button on the remote once more. </li> <li>Step 10: Turn the ignition back to the OFF (I) position. </li> <li>Step 11: Turn the ignition to the ON (II) position one final time. </li> <li>Step 12: Press and release the LOCK button. If successful, the door locks will cycle, indicating the vehicle is in programming mode. </li> <li>Step 13: Press the LOCK button on each remote you want to program, including the one used to enter programming mode. The locks will cycle to confirm each remote has been accepted. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode. </li> <li>Step 15: Test all remotes to verify the lock and unlock features work as expected.</li> </ul>

2007 Acura MDX

Join our newsletter