<h1>2007 GMC Acadia – Remote Key Fob Programming</h1> <p><font size="3"><b>System Type:</b> Driver Information Center (DIC) Enabled </font></p> <p><font size="3"><b>Step-by-Step Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Insert the ignition key into the ignition and turn it to the ON position (do not start the engine). </font></li> <li><font size="3">Step 2: Use the vehicle information button on the dashboard to scroll through the menu until the display shows “PRESS TO RELEARN REMOTE KEY.” </font></li> <li><font size="3">Step 3: Press the SET/RESET button to enter programming mode. The screen will change to display “REMOTE KEY LEARNING ACTIVE.” </font></li> <li><font size="3">Step 4: Take the first remote and press and hold both the LOCK and UNLOCK buttons at the same time. Hold for approximately 15 seconds. </font></li> <li><font size="3">Step 5: Wait until you hear a chime, which confirms that the remote has been successfully programmed. </font></li> <li><font size="3">Step 6: If you have additional remotes to program, repeat Step 4 for each remote. You can program up to eight remotes total. </font></li> <li><font size="3">Step 7: Once all remotes are programmed, turn the ignition key to the OFF position and remove it from the ignition. </font></li> <li><font size="3">Step 8: Test each programmed remote to verify proper function, including locking and unlocking the doors.</font></li> </ul>
