<h1>2007 GMC Envoy – Remote Programming Instructions</h1> <p><font size="3"><b>System Type:</b> Standard Keyless Entry </font></p> <p><font size="3"><b>Programming Steps:</b> </font></p> <ul> <li><font size="3">Step 1: Ensure all vehicle doors are fully closed. </font></li> <li><font size="3">Step 2: Insert the key into the ignition but do not turn it. </font></li> <li><font size="3">Step 3: Press and hold the UNLOCK button on the driver’s door panel. </font></li> <li><font size="3">Step 4: While holding the UNLOCK button, quickly turn the key: ON, then OFF ON, then OFF again </font></li> <li><font size="3">Step 5: Release the UNLOCK button. If successful, the door locks will cycle. </font></li> <li><font size="3">Step 6: Press and hold the LOCK and UNLOCK buttons on the remote until the locks cycle again. </font></li> <li><font size="3">Step 7: Repeat Step 6 for any additional remotes. </font></li> <li><font size="3">Step 8: Turn the ignition to ON to exit programming mode. </font></li> <li><font size="3">Step 9: Test all remotes to confirm functionality.</font></li> </ul>
