2007 Honda Odyssey

2007 Honda Odyssey – Keyless Entry Remote Fob Programming Instructions

Step-by-Step Procedure:

  • Step 1: Turn the ignition switch to the ON (II) position.
  • Step 2: Within 4 seconds, press the LOCK or UNLOCK button on one of the remotes. Ensure the remote is aimed at the receiver near the glove box.
  • Step 3: Within 4 seconds, turn the ignition switch to the LOCK (0) position.
  • Step 4: Repeat Steps 1, 2, and 3 two more times using the same remote. Perform each step quickly and accurately.
  • Step 5: Within 4 seconds, turn the ignition switch back to the ON (II) position again. Step 6: Within 4 seconds, press the LOCK or UNLOCK button on the same remote. The door locks should cycle to confirm you have entered programming mode. Press the same button again to continue.
  • Step 7: Press the LOCK or UNLOCK button on each additional remote you wish to program. After each press, the locks should cycle, indicating successful programming.
  • Step 8: Turn the ignition switch to the LOCK (0) position to exit programming mode.
  • Step 9: Test all remotes to confirm functionality.