2007 Honda Ridgeline

<h1>Keyless Entry Remote Programming Instructions – 2007 Honda Ridgeline</h1> Important Reminders: These instructions apply only to the remote (keyless entry) portion of the key fob. The key blade or combo key must be programmed separately by a qualified professional in order to start the vehicle. This procedure requires a fully functional key that can start your vehicle. Step-by-Step Programming Procedure <ul> <li>Step 1: Insert the working key into the ignition and turn it to the ON position (do not start the engine). </li> <li>Step 2: Within 1 to 4 seconds, press the LOCK or UNLOCK button on the remote while pointing it at the instrument panel. </li> <li>Step 3: Within 1 to 4 seconds, turn the ignition to the OFF position. </li> <li>Step 4: Turn the ignition back to ON, and again, within 1 to 4 seconds, press the LOCK or UNLOCK button. </li> <li>Step 5: Turn the ignition to OFF within 1 to 4 seconds, then repeat the ON–press–OFF sequence again: ON → press LOCK/UNLOCK → OFF ON → press LOCK/UNLOCK (You should now have completed four ON cycles with button presses.) </li> <li>Step 6: After the fourth button press (with ignition in ON), the door locks should automatically cycle, confirming the system has entered programming mode. </li> <li>Step 7: Within 1 to 4 seconds, press the LOCK or UNLOCK button again on the same remote to store it. </li> <li>Step 8: If you have additional remotes to program (up to three total), continue within 15 seconds. Point each remote at the instrument panel and press LOCK or UNLOCK. The door locks should cycle after each remote is successfully programmed. </li> <li>Step 9: Turn the ignition switch to the OFF position and remove the key. Step 10: Test each remote to ensure it operates the door locks correctly.</li> </ul>

2007 Honda Ridgeline

Join our newsletter