<h1>2007 Lexus RX350 Keyless Entry Remote Fob</h1> <p><font size="3"><b>Smart Key Important Information:</b> This vehicle is not on-board programmable and requires specialized equipment to program the smart key remote fobs. If you have multiple fobs, you can program them all at the same time. </font></p> <p><font size="3"><b>Step-by-Step Instructions for Programming the Remote Fob:</b> </font></p> <ul> <li><font size="3">Step 1: Prepare the Vehicle Ensure the vehicle is in Park. Make sure the driver’s door is open and unlocked. All other doors should be closed. Insert the key into the ignition but do not turn the key. </font></li> <li><font size="3">Step 2: Cycle the Key to Enter Programming Mode Turn the ignition ON, then immediately turn it back to OFF. Repeat this process twice (ON to OFF). On the third time, leave the key in the ON position. </font></li> <li><font size="3">Step 3: Close and Open the Driver’s Door Close the driver’s door and immediately open it again. Do this twice. This step should be completed within 40 seconds of turning the ignition ON the third time. </font></li> <li><font size="3">Step 4: Insert the Key and Turn the Ignition ON Insert the key into the ignition again and leave it in the ignition. Close the driver's door. Turn the ignition to the ON position again (do not start the engine) and immediately back to OFF. Remove the key from the ignition. </font></li> <li><font size="3">Step 5: Confirm Programming Mode Activation Within 3 seconds after turning the ignition off, you should hear the power door locks cycle (lock then unlock), indicating the vehicle has entered programming mode. If the door locks do not cycle, start again from Step 1.</font></li> <li><font size="3"> Step 6: Program the Remote Fob(s) Press and hold the lock and unlock buttons on the remote fob simultaneously for at least 1.5 seconds. Immediately after releasing the lock and unlock buttons, press and hold the lock button by itself for about 2 seconds. Within 3 seconds, the door locks should lock and then unlock once, indicating the fob was successfully programmed. </font></li> <li><font size="3">Step 7: Repeat for Additional Fobs Repeat Step 6 for each additional remote fob you wish to program. You can program up to 4 fobs at once. Each time you program a fob, you will hear the door locks cycle to confirm. </font></li> <li><font size="3">Step 8: Complete the Programming Process Once all remotes have been programmed, open the driver’s door to exit programming mode. </font></li> </ul> <p><font size="3"><b>What Are Your Options?</b></font></p> <p><font size="3"> If the vehicle does not successfully enter programming mode or the remote does not work after programming, specialized equipment is required. Rent specialized equipment for programming the key fob if necessary. Follow the instructions provided with the equipment to successfully program the fob. </font></p> <p><font size="3"><b>Additional Tips:</b> </font></p> <ul> <li><font size="3">Battery Health: Make sure the fob’s battery is fresh and installed correctly. A weak battery may </font></li> <li><font size="3">prevent programming. Timing: Be sure to perform each step promptly as the system only allows a short window for each action.</font></li> <li><font size="3">Limitations: If your vehicle has a smart key system (as opposed to a standard remote fob), the process may differ, and you may need to consult a professional.</font></li> </ul>
