<h1>2007 Lincoln Town Car – Programming Keyless Entry Remotes</h1> <p><font size="3"><b>System Type:</b> Onboard Programmable with Ignition Sequence </font></p> <p><font size="3"><b>Step-by-Step Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Make sure all doors, including the trunk, are securely closed. </font></li> <li><font size="3">Step 2: Open the driver’s door and press the UNLOCK button once on the interior panel. Leave the door open throughout the procedure. </font></li> <li><font size="3">Step 3: Insert the key into the ignition. </font></li> <li><font size="3">Step 4: Turn the key from OFF to RUN eight times in under 10 seconds, stopping on RUN on the final turn. </font></li> <li><font size="3">Step 5: The door locks will cycle to confirm that programming mode has been activated. </font></li> <li><font size="3">Step 6: Within 20 seconds, press any button on the first remote. The locks will cycle again to confirm successful programming. </font></li> <li><font size="3">Step 7: Repeat Step 6 for any additional remotes, each within 20 seconds of the last. </font></li> <li><font size="3">Step 8: Turn the ignition to OFF. The final lock cycle will confirm that the session has ended.</font></li> </ul>
