<h1>Keyless Entry Remote Programming – 2007 Saturn Sky</h1> <p><font size="3"><b>Important Notice:</b> The 2007 Saturn Sky does not support onboard programming for keyless entry remote fobs. Programming requires the use of specialized diagnostic tools and must be completed by a trained automotive technician or qualified service provider. </font></p> <p><font size="3"><b>Step-by-Step Programming Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Contact a Qualified Automotive Technician Locate a professional technician or service center equipped with the proper diagnostic equipment to program keyless remotes for this vehicle. </font></li> <li><font size="3">Step 2: Bring All Remotes You Plan to Use Make sure to have all remotes—both new and existing—available during the programming session. Any remotes not present will be erased from the system and will no longer function afterward. </font></li> <li><font size="3">Step 3: Prepare the Vehicle for Service If your vehicle is operational, it’s generally more cost-effective to drive it to the technician’s location rather than scheduling mobile service. </font></li> <li><font size="3">Step 4: Provide Ownership Verification Be prepared to present documentation such as vehicle registration or title, along with a government-issued photo ID. Proof of ownership is often required to authorize key and remote programming. </font></li> <li><font size="3">Step 5: Technician Connects Diagnostic Tool The technician will access the vehicle’s onboard control system by connecting a diagnostic scan tool to the OBD-II port located under the dashboard. </font></li> <li><font size="3">Step 6: Enter Programming Mode Using the scan tool, the technician will place the vehicle into keyless remote programming mode, allowing the system to recognize new remotes. </font></li> <li><font size="3">Step 7: Program and Test Each Remote Each remote will be programmed individually. After each one is added, its functions—lock, unlock, and panic—will be tested to confirm successful pairing. </font></li> <li><font size="3">Step 8: Finalize Programming and Disconnect Equipment Once all remotes have been registered, the technician will complete the session and disconnect the scan tool. </font></li> <li><font size="3">Step 9: Confirm Full Functionality Test all remote fobs on the vehicle to ensure proper operation before leaving the service appointment.</font></li> </ul>
